Serving Arizona, Colorado, Nevada, New Mexico, and Utah.

ULTRASLICE 6000 PRECISION SAW

Developed to facilitate precision sectioning applications in Industry and Research, the ULTRASLICE 6000 Precision Saw provides the user with a unique combination of features:

VERSATILE SAMPLE HOLDING
The system may be readily converted to handle sample cutting requirements of most shapes, sizes, and applications.

CUTTING ACCURACY
The use of precision lead screws on all sample feed mechanisms mean that cuts can be positioned accurately.

REPRODUCIBLE RESULTS
All-metal construction and an accurately calibrated spindle movement assures low transmission of vibration to the workpiece. This gives reproducibility of performance for cutting materials of widely varying mechanical properties; from the hardest steels and non-metallics down to delicate crystal materials.

LONG CUTS & DICING 
The large work-table and overall layout of the machine, allows for long cuts to be achieved, indexed in the Y direction with the integral motorized table feed.

ALL BLADE TYPES
The system accepts a wide range of O.D. diamond and abrasive blades for standard cutting, and is readily adaptable to accept special 'dicing' blades for the smallest kerf.

BLADE SPEED
ULTRASLICE 6000 has the power and range of blade speeds to achieve higher cutting rates when necessary.

Click here to OPEN A NEW WINDOW with information about saw blades (close new window to return here)

Click here to see ULTRASLICE accessories
The system features an integral coolant recirculation system which extends blade life and clears cutting debris to improve cutting rate and surface quality.

ULTRASLICE 6000 can handle sample cutting requirements of all shapes, sizes and applications. Samples may be presented to the blade with table attachments (X, Y, W, and Z direction accessories). 

A wide range of workholders allow for holding samples of most dimensions and orientations and are described overleaf. Sample mounting is very straight-forward with the use of lever-actuated 'Quick Release' holders which may be removed or mounted in a few seconds.

 All the system's controls are positioned on a conveniently located panel, including coolant control, table feed, main spindle controls, and tachometer and ammeter readouts. An automatic cut-out is provided so that an ULTRASLICE 6000 may be left unattended during a cutting cycle and will turn off after cut completion.

A fully-enclosed splashguard is provided which may be opened to allow front panel access or be completely removed.

ULTRASLICE 6000 will accept a range of blades offered by ULTRA TEC, including sintered and electrometallic diamond blades, abrasive cut-off blades and special dicing varieties.

ULTRASLICE 6000 PRECISION SAW

General Specifications
Part No.: 8560.3
Spindle Speed (RPM): Variable up to 6000
Integral Coolant Recirculation Standard
Drive Motor Type 0.5 HP, DC (permanent magnet)
Work Platform Dimensions (cm) 24 x 48 (9.5 x 18.9 inches)
Y Direction Traveling Table: Standard (motorized and speed controllable)
Y Table Dimension (cm): 11.2 x 16.2 (4.40 x 6.4 inches)
Y Stage Travel Speeds (cm/min.): Variable 0.18 to 31.75 (0.07 to 12.5 inches/min.)
Spindel Diameter (mm.) 12.7 (0.5 inches)
Tachometer: Standard
Ammeter Readout: Standard
Unit Footprint (cm): 52 x 52 (20.5 x 20.5 inches)
Unit Weight (kg): 32 (70 lbs.)
Power Requirements: 110V/200-250V 60/50Hz

Accessories

1301.5 Lamp Attachment
3501.1 Micropositioned, counterbalance cutting arm attachment
3582.2 X-Stage add-on for Traveling Table
3567.1 Z-Stage (1.75 inch vertical travel) for R&D applications
3588.1 Z-Stage (2mm vertical travel) for production applications
3590.1 W-Rotational Stage add-on for Traveling Table
3559.1 Rotating Fixture-for increased cut depth and decreased blade wander during cutting
3541.8 "Quick Release"- holder mounting table
3526.1 Laser Alignment Device
3541.8 Repeat Position Clamping Plate

Standard Workholders

3548.1 Odd Shape and Parallel Clamp (for samples up to 1.25" in largest dimension)
3575.1 Vise Attachment (for samples up to 1.5" diameter)
3557.1 Horizontal Block Clamps (pair)
3533.1 Horizontal Wafer Clamps (pair)
3552.1 Saddle Clamps (single)
2552.2 Saddle Clamps (dual)
3549.1 Micromount Holder ( 1" diameter samples)
3569.1 Micromount Holder ( 1 1/4" diameter samples)
3570.1 Micromount Holder ( 1 1/2" diameter samples)
3545.1 V-Clamp, single for samples 2-15mm diameter
3547.1 V-Clamp, single for samples 16-34mm diameter
3545.2 V-Clamp, dual-for samples 2-15mm diameter (0.03" slot)
3547.2 V-Clamp, dual-for samples 16-34mm diameter (0.18" slot)

BRIDGE Technology is an authorized representative of ULTRA TEC MANUFACTURING, INC.

To request further information please call Bridge Technology at (480) 988-2256 or send e-mail to Larry Bridge at: sales@bridgetec.com

[Home] [All Products] [E-mail][ULTRA TECH Products]