Jandel Hall effect measurement probe head

Bridge Technology Services North America for the Jandel line of four point probes

Jandel Hall Measurement
Four Point Probe Head JANDEL Specialty Four Point Probe Heads

JANDEL ENGINEERING LTD. manufactures a four point probe for use in making Hall measurements. It is a precision probe head which has a square arrangement of the probes with 2.00 mm separation. The height overall is 18.5 mm when the needles are uncompressed. The probe needles can be built to suit a specific requirements, but are commonly supplied with 100 micron tips radius. Spring load is fixed at 100 grams. The lead is unscreened and approximately 1 meter long. Except for the piano wire springs, all of the materials used in the construction are non-magnetic. These probe are made on a special basis.

Please CLICK HERE if you are interested in a complete Hall Effect Measurement System.

BRIDGE Technology is an authorized representative of JANDEL Engineering Ltd.

BACK to the Jandel Four Point Probes Page

To request further information please call Bridge Technology at (480) 219-9007 or send e-mail to Larry Bridge at: sales@bridgetec.com

[Home] [Products] [E-mail]